Page 6
C Matsushita Electric Industrial Co., Ltd. 2001...
Page 7
Matsushita Electric Industrial Co., Ltd Web Site: http://www.panasonic.co.jp/global/ Printed in Japan MS0601-1102...
Page 8
Setting the fan motor software Be sure to confirm the software settings are completed under the procedure below. By this software settings the fan will detect its mulfunctions and stop operation to avoid possible accidents. Note: Instructions vary depending on the display. 1) While pressing and holding the VOL button on the display.
Page 9
Prepare the Wide Plasma Display 1) Remove the rear cover from the display. Place the display facing downward on a clean blanket or the like, and follow the steps below. Remove 4 A bolts, 16 B screws, and 5 C screws from the display (25 bolts and screws).
Page 10
Components Cooling fan Cooling fan relay printed circuit board Cooling fan mounting screw (M3) Points to note during installation This optional cooling fan kit is designed exclusively for use with this display model. In order to ensure correct, problem-free operation of the Wide Plasma Display, do not install the Display in any of the following places.
Thank you very much for purchasing the Plasma Display cooling fan Kit. Installation work should only be carried out by a qualified technician. • If the unit is installed incorrectly, the display may fall down and personal injury may result. Precautions with regard to setting up WARNING Always have a service technician perform the installation.
TY-UPK110 Plasma Display Cooling Fan Kit Installation Instructions Before attempting to install this kit, please read these instructions completely. TQZH333-1...