Table of Contents
Advertisement
Normally set Frequency,
●
is not displayed or if necessary, enter each value specified by your
cable provider with numeric buttons.
After settings, select
●
3. The confirmation screen is displayed and press
(Settings are made automatically)
When the operation is completed, the channel at the lowest position will
●
be displayed.
■
Auto Setup using the buttons on the TV
1. Press and hold INPUT/OK/HOLD for MENU button for 3 seconds to
display the menu
2. Set
Auto Setup
with following control panel buttons
Move the cursor / select from a range of options / select the menu item
●
(up and down only)
Access the menu / store settings after adjustments have been made or
●
options have been set with INPUT/OK/HOLD for MENU button.
Manual Tuning
Normally use
Auto Setup
●
If tuning has not been done completely or for adjusting the direction of the
●
aerial, use this function. (DVB)
All DVB channels found will be added to
●
■
DVB-C
1. Enter the frequency with numeric buttons
Normally set
Symbol Rate
●
2. Select
Start scan
Symbol Rate
Start scan
with
or
Update Channel List
and
Service ID
with
/
and press
- 52 -
and
Network ID
to Auto. If
/
and press
OK
OK
to start
Auto Setup
to retune DVB channels.
Channel
List.
to Auto.
OK
to search
Auto
to search.
Advertisement
Table of Contents
