Manual Tuning
Normally use
Auto Setup
●
If tuning has not been done completely or for adjusting the direction of the
●
aerial, use this function. (DVB)
All DVB channels found will be added to
●
■
DVB (UK)
1. Select
Frequency
2. Press
OK
to search
All channels found will be added to the Channel List.
●
■
DVB (Ireland)
1. Select a channel with
channel
Set where the level of
●
2. Press
OK
to search
■
Analogue
Set Analogue channel manually after
1. Select the channel position with numeric buttons
2. Select the channel with Channel Up / Down button
3. Search with
/
4. Select
Store
with
Use
Fine Tuning
●
programme (affected by weather conditions, etc.).
– Ireland only
If a VCR is connected only with the RF cable, select channel position 0.
●
or
Update Channel List
with
/
/
and adjust frequency with
Signal Quality
Auto
/
and press
OK
to make small adjustments to the tuning of an individual
- 63 -
to retune DVB channels.
Channel
List.
/
becomes the maximum.
Setup.
to set
for each