Table of Contents
Advertisement
Manual Tuning
■
Digital TV
Normally use
Auto Tuning
channels.
If tuning has not been done completely or for adjusting the direction of the
aerial, use this function.
All Digital TV channels found will be added to
●
1. Select physical channel with
2. Press
OK
to search.
■
Analogue TV
Set Analogue TV channel manually after
1. Select the channel position with
2. Select the channel with
3. Search with
/
4. Select
Store
with
If a VCR is connected only with the RF cable, select channel position 0.
●
Update Channel List
By updating the Digital TV channel list, you can add new channels, delete
removed channels or change channel names and positions automatically.
The channel list is updated while keeping your settings in
●
Channel
List,
Child
Depending on the signal condition, the update may not work properly.
●
or
Update Channel List
/
and select offset with
Auto
Numeric
Channel Up /
Down.
.
/
and press
OK
Lock, etc.
- 81 -
to retune Digital TV
Channel
List.
Tuning.
buttons.
to set.
Favourites
/
.
Edit,
Advertisement
Table of Contents
