■
DVB-T
1. Select a channel with
channel
Set where the level of
●
2. Press
OK
to search
■
Analogue
Set Analogue channel manually after
1. Select the channel position with numeric buttons
2. Select the channel with Channel Up / Down button
3. Search with
/
4. Select
Store
with
Use
Fine Tuning
●
programme (affected by weather conditions, etc.).
If a VCR is connected only with the RF cable, select channel position 0.
●
Update Channel List
By updating the DVB channel list, you can add new channels, delete removed
channels or change channel names and positions automatically.
The channel list is updated while keeping your settings in
●
Channel
List,
Child
Depending on the signal condition, the update may not work properly.
●
New Channel Message
Selects whether to give a notification message when a new DVB channel is
found or not.
When a notification message appears, you can perform
●
List
pressing OK.
Signal Condition
Selects a channel and checks the signal condition.
A good Signal Strength is not an indication of suitable signal for DVB
reception.
/
and adjust frequency with
Signal Quality
Auto
/
and press
OK
to make small adjustments to the tuning of an individual
Lock, etc.
- 53 -
/
becomes the maximum.
Setup.
to set
Favourites
Update Channel
for each
Edit,