Update Channel List; New Channel Message; Signal Condition - Panasonic TX-L42ETW60 User Manual

Update Channel List

By updating the DVB channel list, you can add new channels, delete removed
channels or change channel names and positions automatically.
The channel list is updated while keeping your settings in
●
Channel List, Child
Depending on the signal condition, the update may not work properly.
●
To update DVB-S channels, set Satellite,
●
before updating.
1) Select Satellite
to access
2) Set each item with
3) After settings, select

New Channel Message

Selects whether to give a notification message when a new DVB channel is
found or not.
When a notification message appears, you can perform
●
List pressing OK.

Signal Condition

Selects a channel and checks the signal condition.
A good Signal Strength is not an indication of suitable signal for DVB
reception.
Use the Signal Quality indicator as follows.
●
– Green bar: Good
– Yellow bar: Poor
– Red bar: Bad (Check the terrestrial aerial, cable or satellite dish)
Vertical lines show the maximum signal value of the selected channel.
●
To change the channel
●
For DVB mode
●
Lock, etc.
/ Search Mode / Scan Mode
/ and press
Start scan with
- 56 -
Favourites
Search Mode and Scan Mode
with / and press
OK to store
/ and press OK
Update Channel
Edit,
OK
to search