Panasonic TX-L42ETW60 User Manual page 55

■
DVB-C
1. Enter the frequency with numeric buttons
Normally set Symbol Rate
●
2. Select Start scan
■
DVB-T
1. Select a channel with
channel
Set where the level of
●
2. Press OK to search
■
Analogue
Set Analogue channel manually after
Set Sound System
●
Normally set Colour System
– SC1: PAL B, G, H / SECAM B, G
– SC2: PAL I
– SC3: PAL D, K / SECAM D, K
– F: SECAM L, L'
1. Select the channel position with numeric buttons
2. Select the channel with Channel Up / Down button
3. Search with /
4. Select Store with
Use Fine Tuning
●
programme (affected by weather conditions, etc.).
If a VCR is connected only with the RF cable, select channel position 0.
●
and Service ID
with / and press
/ and adjust frequency with
Signal Quality
Auto
and Colour System, and then perform this function.
to Auto.
/ and press OK
to make small adjustments to the tuning of an individual
- 55 -
to Auto.
OK to search
/
becomes the maximum.
Setup.
to set
for each