SCART cable
– AV1 (SCART) adaptor (supplied) is necessary when connecting to the
TV.
Terrestrial / cable terminal
RF cable
DVD Recorder / VCR
Terrestrial aerial
For VIERA Link connections
●
Functions
= Note =
External equipment and cables shown are not supplied with this TV.
●
Please also read the manual of the equipment being connected.
●
Keep the TV away from electronic equipment (video equipment, etc.) or
●
equipment with an infrared sensor, otherwise distortion of image / sound
may occur or operation of other equipment may be affected.
When using a SCART or HDMI cable, it is recommended to use fully wired
●
one.
Check the terminal type and cable plugs are correct when connecting.
●
Selecting channel
1. Display the
TV Selection
2. Select the mode with
DVB-S
/
DVB-C
/
The selectable modes vary depending on the channels stored.
●
You can also select the mode pressing
●
control or INPUT/OK/HOLD for MENU button on the control panel of
the TV.
If the
TV Selection
●
3. Select a channel with Channel Up / Down or numeric buttons
Press the numeric buttons to select a channel position with 2 or more-
●
digit (e.g. 399, press
VIERA Link "HDAVI Control™"
screen with
TV
/
and press
DVB-T
/
Analogue
menu is not displayed, press
).
- 16 -
Summary of VIERA Link
OK
to set
TV
repeatedly on the remote
TV
to switch the mode.