1. Introduction and Installation
1.4 Overview
1
7
8 9
* The pictured model is KX-FP218.
1 Document guides
2 Paper tray
3 Metal recording paper guide
4 Paper support
5 Recording paper exit
6 Recording paper entrance
7 Microphone (KX-FP218 only)
8 Front cover
9 Document entrance
j Document exit
k Speaker
l Green button (Back cover release button)
m Back cover
Removing the shipping tape
8
6
4
5
3
2
j
k
Installation
1.5 Ink film
The included film roll is a starter ink film.
1
Open the front cover.
m
l
2
Release the back cover by pushing the green button
(1).
3
Open the back cover.
4
Insert the blue gear of the ink film roll into the front
left slot of the unit (2) and the white gear of the ink
film roll into the rear left slot of the unit (3).
L The ink film is safe to touch and will not rub off on
your hands like carbon paper.
1