Manual Clock Set; Reset All Unit Memory Functions - Panasonic PV-C2523-K Operating Instructions Manual

*Important: If a remote control button does not work when pressed, press the COMBO button on
the remote and try the button again.

Manual Clock Set

If AUTO CLOCK SET was incomplete, manually
set the clock as follows.
Press ACTION on the remote to display
1
SET CLOCK Menu screen.
SELECT :
END
Press to select the month and
2
press to set. In the same manner,
select and set the date, year, time, and
DST. (Daylight Saving Time)
SET COMPLETED
SET
START : ACT I ON
Press ACTION twice to start CLOCK and
3
exit.
POWER
ACTION
When moving unit to a new location, or if a mistake
was made in the Initial Setup section.
• Make sure a tape is not inserted in the unit.
SET CLOCK
:
1 / /
DST : ON
SET :
: ACT I ON
SET CLOCK
:
2 / 6 / 2003 THU 12 00PM
DST : ON
:
SELECT/SET
:CH UP
:CH DOWN
:VOL UP
:VOL DOWN

Reset all unit Memory Functions

POWER VOL CH STOP/EJECT REW/
VIDEO IN AUDIO IN
ACTION
1
Turn the unit
Power on.
Press and hold both
2
PLAY/REPEAT and FF on the
unit for more than 5 sec onds.
• The power will shut off.
• Please ignore "NO CASSETTE"
warning.
3
Do "Initial Setup" on page 8.
Note to CABLE System Installer
This reminder is provided to call the CABLE
(Cable TV) System Installers attention to
Article 820-40 of the NEC that provides
guidelines for proper grounding and, in
par tic u lar, specifi es that the cable ground
shall be con nect ed to the grounding system
of the building, as close to the point of cable
entry as practical.
PLAY/REPEAT FF/ REC TIMER/FM
REC ON TIMER PROG TIMER
9 9