Panasonic PV-C2523-K Operating Instructions Manual page 23

*Important: If a remote control button does not work when pressed, press the COMBO button on
the remote and try the button again.
Cancel a Timer Recording:
(Recording is in progress)
Hold down STOP for a few
seconds to cancel the Timer
Recording.
• Any future daily or weekly recordings
will be performed as programmed.
SELECT/SET
:CH UP
:CH DOWN
:VOL UP
:VOL DOWN
PROG
ADD/DLT
STOP
Review, Replace or Clear Program
Contents :
(Recording is not in progress)
Repeat steps 1 and 2 on page 22.
1
2
P DT START STOP CH SPD
1 day 9 : 00p 12 : 00a 08 SP
2 8 10 : 00a 12 : 00p 125 SP
3 10 8 : 00p 9 : 00p 10 SP
4 SU 9 : 00p 10 : 00p L LP
CANCEL : ADD / DLT
SELECT : SET :
END : PROG
3 To Replace program...
DATE START STOP CH
8 SAT 9:00P 12: 00A 08
TODAY
SP
----------------------------------------------
SELECT : SET :
END : PROG
To Clear program...
P DT START STOP CH SPD
1 -- -- : -- -- : -- -- --
2 8 10 : 00p 12 : 00a 125 SP
3 10 8 : 00p 9 : 00p 10 SP
4 SU 9 : 00p 10 : 00p L LP
CANCEL : ADD / DLT
SELECT : SET :
END : PROG
Press PROG twice to exit this mode.
4
Notes
• 2 minutes before Timer recording is performed, "PLEASE
PREPARE FOR TIMER REC" appears and/or the PROG
TIMER Indicator fl ashes. Be sure a cassette with record tab is
loaded and the unit is in Stop mode.
• If the start times of two programs overlap, the lower numbered
program will have priority.
• If the start time for a Timer Recording comes up during a
normal recording or One Touch Recording (page 12), the Timer
Recording will not be performed.
• If there is a power interruption of more than one minute, the
recording may not be performed or continued.
• If "INCOMPLETE" appears after all items have been set, check
all entries and make necessary corrections.
Press to select the
desired program.
1) Press to display.
2) Press to select
and press or
to set new program
contents.
3) Press PROG.
Press ADD/DLT.
23 23