Copy Your Tapes (Dubbing); Selecting Input Mode - Panasonic PV-C2523-K Operating Instructions Manual

e

Copy Your Tapes (Dubbing)

*Important: If a remote control button does not work when pressed, press the COMBO button on
the remote and try the button again.
Connections you'll need to make.
Playback (Source)
1
2
3
(Perform operation of steps 4 and 5 on both units at same time.)
4
5
STOP
Caution
• Unauthorized exchanging
and/or copying of copyrighted
recordings may be copyright
infringement.
Playing (Source) VCR
AUDIO VID EO
OUT
IN
Insert
pre-recorded
tape.
Press PLAY then
PAUSE at starting
point to put in
Standby mode.
Press PLAY
to start dubbing.
Press STOP
to stop dubbing.
Recording (Editing) unit
VIDEO IN AUDIO IN
Recording (Editing) unit
Insert blank tape
with record tab.
• Dubbing tapes protected with
Copy Guard will have poor
quality results.
Select "LINE" mode.
See "Selecting Input Mode" below.
Press REC, then
PAUSE/SLOW
immediately to put in
Standby mode.
Press PAUSE/SLOW
to start dubbing.
Press STOP
to stop dubbing.

Selecting Input Mode

Method 1:
Press CH . The display will change as follows.
1
LINE
Method 2:
a Press ACTION for MAIN MENU.
b Press to select "TV", then press
ACTION for SET UP TV screen.
c Press to select "INPUT SELECT," and then
press to select "TUNER" or "LINE."
d Press ACTION twice to exit this mode.
2 3
(CABLE)
(TV)
125 or 69
13 13