Table of Contents
Advertisement
One Time Setup
*Important:
If the remotecontrol P OWER, CH &v, MENU,
PROG, ON-TIMER,R-TUNE, FM/TV and
ADD/DLT button doesnotworkwhenpressed,
pressthe MAINbuttononthe remotecontrol
andtrythe buttonagain.
When the Combination VCR is turned on for
the first time, it automatically
enters the setup
mode. Setup includes the following:
• Choose the language for on-screen menus
and messages.
• Tell the Combination VCR how your
equipment is hooked up (page 5) so the
Combination VCR can correctly place
channels into memory.
• Get the Combination VCR re_;dyfor clock set.
I_llPcheck
list before you begin.
[] Your Combination VCR is connected to an
Antenna or Cable system (see page 5).
IIIIII
/
/
2 2.3.4 1
To Set Language, C hannels, a ndClock
1 Press POWER* to turn the Combination VCR on.
2
Press CH •_',
or VOLI_ for on
screen displays in English,
Spanish or French.
• If you choose the wrong language,
please see the =Reset all Combination
VCR Memory Functions" section on
page 28.
f
• If you use a cable box, the cable box must be left on for auto
channel set.
SELECT
LANGUAGE
PUSH
CH •
:English
PULSE CH •
:Espal_l
APP.
VOL
÷
:FranC:Ills
Important: If you use a.cable box, turn it on and select
the PBS station in your time zone.
3
Press CH • to start Channel
Auto Set and Clock Auto Set.
These on-screen displays will
appear in sequence.
• CH AUTO SET PROCEEDING
• CH AUTO SET COMPLETED
• AUTO CLOCK SET PROCEEDING
CHANNEL/CL(X;K
AUTO S ET
CONNECT
ANTENNA
CABLE
AND
IF
YOU
USE
A CABLE
BOX,
TUNE
IT
TO
YOUR
LOCAL
PBS
CH
THEN...
PLEASE
PUSH
CH
UP
KEY
or
7/28/1998
TUE 12:00PM
DST:ON
SE'I-rlNG
: CH
10
AUTO CLOCK SET
COMPLETED
END
: PUSH CH UP KEY
AUTO CLOCK
SET
IS
I NCO_PLETE
PUSH MENU TO
s_=r CLOCK
1
MENU
DELETE
SELECTI
SET
(Avo.)
keys
.2
3.
4
'_4 _
If the displayed time is correct, press CH • to
exit.
• Thisconcludes one time Combination VCR setup.
• See importantnote at the bottomof thispage.
If the displayed time and DST, are not correct..,
If you happen to live close to two time zones, the Combination VCR may
have recognized the PBS channel (setting channel) in the wrong time
zone. Please do the following to correct the situation.
a. Make a note of the SETTING: CH number shown on-screen and
press CH •
to exit.
b. Delete the setting channel from the Combination VCR channel memory.
(See the Add or Delete a Channel section on the next page.)
c. Press MENU to display the MAIN MENU.
d, Press •T<I_
to select =CLOCK," and then press MENU to display
the SET CLOCK screen.
• If you use a cable box and have multiple PBS stations, tune the
cable box to a different PBS station and try auto clock set again
using the menu.
e. Press &T to select =AUTO SET," and then press I_ to set and CH •
to start Auto Clock set.
Using the
bV • •
keys
Whenever a menu or program
_1
I_
screen is displayed, CHANNEL UP/_,_
DOWN and VOLUME UP/DOWN
on the remote control function as ,&V<IIV
only. For VOLUME UP/DOWN functions,
use the buttons on the Combination VCR.
8
IMPORTANT NOTE FOR AUTO CLOCK SET WHEN USING CABLE BOX
• Auto clock set will be performed when the Combination VCR is tumed
off the first time each day. If you use a cable box and you want auto
clock set to be performed, the cable box must be left on and tuned to
the PBS channel at the time the Combination VCR power is turned off.
• If you use Audio/Video Jack connection between the Combination VCR
and Cable Box, you must also connect the RF coaxial cable in order to
use the auto clock set and channel auto set features.
• If for any reason the time is changed manually, automatic time
correction will not occtJr.
Advertisement
Table of Contents
