Konica Minolta 7020 Instruction Manual page 232

[4] EKC (Electronic Key Counter) (continued)
I 2. EKC Data List
Use this setting to display the list of copy count and copy limit for each ID No., and to
edit, add, and delete these EKC data.
As for the machine with Fax kit installed, the EKC Data List Screen also allows you to
check the facsimile transmission page count for each ID No.
Procedure
1 Touch 4. E.K.C. on the Key Operator Mode Screen. Enter an 8-digit EKC master key
code, then touch OK to display the EKC Setting Menu Screen.
NOTE:
If an invalid EKC master key code is entered, continue by entering the valid 8-digit code.
2 Touch 2. E.K.C. data list to display the EKC Data List Screen.
If the machine is equipped with Fax kit, the EKC Data List Screen in COPY mode will
be displayed. To display the EKC Data List Screen in FAX mode, touch the FAX key
on the screen.
3 To delete the EKC data:
(1) Touch Upper or Lower arrow (L/M) key on
the right in the EKC Data List Screen to
highlight the EKC data to be deleted.
(2) Touch DEL. The Delete Confirmation
Screen will be displayed.
(3) Touch Yes to delete, or touch No to cancel.
4 To add the EKC data, touch ADD . The EKC
Data Input Screen with invalid Clear key will
be displayed. To input the EKC data, see p.
12-16 to p. 12-17.
5 To edit the EKC data, touch Upper or Lower
arrow (L/M) key on the right in the EKC Data
List Screen to highlight the EKC data to be
edited, then touch EDIT . The EKC Data Edit
Screen with valid Clear key will be displayed.
(1) To edit the EKC password, touch Pass-
word. Enter a new 5-digit EKC password
using the keypad on the control panel. Do
not enter "00000".
(2) To edit the name, touch Name. For details
on the Name Input Screen, see p. 12-17.
(3) To edit the copy limit, Touch Limit. Enter a
new 6-digit copy limit using the keypad on
the control panel. Entering "000000" signi-
fies no copy limit.
(4) To clear the copy count, touch Clear.
(5) To complete the settings, touch OK on the
EKC Data Edit Screen.
To cancel the settings, touch RETURN .
The EKC Data List Screen will be dis-
played.
6 Touch RETURN to restore the EKC Setting Menu Screen.
7 Touch RETURN to restore the Key Operator Mode Screen.
8 If no further changes are required, touch RETURN to restore the Basic Screen to
perform copying operations.
12-18