Lock Job Memory; Lock Job; Memory - Konica Minolta 7045 Instruction Manual

[5] Lock Job Memory

Use this function to lock/unlock or delete a Job that has been programmed.
A locked job is indicated by a lock icon ( ) on the job number of the Job Selection
Screen.
The settings of a locked job cannot be changed.
Procedure
1 Touch 5. Lock Job memory on the Key Operator Mode Screen to display the Job
Memory Lock/Delete Screen.
2 To lock or unlock a job memory, operate the procedure below.
(1) Use L Upper arrow and M Lower arrow keys on the right in the Job Memory
Lock/Delete Screen to scroll to the job to be locked/unlocked.
(2) Touch the desired job number key to highlight it.
(3) Touch Job Lock . The job to be locked will display the lock icon in the job number.
The previously locked job will be unlocked and the lock icon will disappear.
3 To delete a job memory, operate the procedure below.
(1) Use L Upper arrow and M Lower arrow keys on the right in the Job Memory
Lock/Delete Screen to scroll to the job to be deleted.
(2) Touch the desired job number key to highlight it.
(3) Touch DEL . Programs and the name will be deleted from the job memory.
NOTES:
• A locked job can also be deleted, with the lock on the job number released at the same time.
• Once deleted, the programs cannot be restored.
4 Touch RETURN to restore the Key Operator Mode Screen.
5 If no further changes are required, touch RETURN to restore the Basic Screen to
perform copying operations.
Key Operator
Mode
System Initial
Copier Initial
Preset Key
EKC

Lock Job

Memory

Paper Type
Panel
Contrast
Key Operator
Data
Weekly Timer
Touch Panel
Adjustment
Power Save
Memory
Switch
List Print
Application
Customize
Density Shift
KRDS Host
12
Key Operator
Mode
12-21