Panasonic TX-L42DT60E User Manual page 60

3. Select LNB Configuration
Select Dual Tuner Mode
●
tuner function.
4. Select LNB / Satellite
Select IN 1 / IN 2
●
1) Set LNB first
– If you set to
– If you set to
AB.
– If you set to
2) Set Satellite for the selected LNB
– Select No Satellite
(available satellite will be searched in Auto Setup).
– Select User defined
– If you set to
Band, User Band Frequency
Cable router you use). For details, read the manual of the Single
Cable router.
Watching
5. Press BACK/RETURN
6. Select Auto Setup
7. Select Satellite /
access
8. Set with / and press
Scan Mode
●
Full:
Scans the whole frequency range.
Quick:
Scans the suitable frequency for the selected satellite.
After settings, select
●
9. The confirmation screen is displayed and press
(Settings are made automatically)
When the operation is completed, the channel at the lowest position will
●
be displayed.
with /
with /
with / and set with
in Signal Input with
One LNB, LNB is not selectable.
MiniDiSEqC or Single
DiSEqC 1.0, select from LNB AA, AB, BA and BB.
if you do not know the connected satellite
to set Test Transponder Frequency
Single Cable, additional settings are required. Set
and
Tuning and editing channels
to store
with / and press
Search Mode / Scan Mode
OK to store
Start scan with
- 60 -
and press OK to access
, set to On with
/
/ to set for each tuner.
Cable, select from LNB AA and
PIN (depending on the Single
Selectable satellites
OK to access
with / and press
/ and press OK
OK to start
/ to use dual
manually.
User
OK to
to search.
Auto Setup