Selecting Channel - Panasonic TX-L42DT60E User Manual

HDMI cable
Set top box
Cable
AV1 (SCART) terminal
SCART cable
– AV1 (SCART) adaptor (supplied) is necessary when connecting to the
TV.
Terrestrial / cable terminal
RF cable
DVD Recorder / VCR
Terrestrial aerial
For VIERA Link connections
●
Functions
= Note =
External equipment and cables shown are not supplied with this TV.
●
Please also read the manual of the equipment being connected.
●
Keep the TV away from electronic equipment (video equipment, etc.) or
●
equipment with an infrared sensor, otherwise distortion of image / sound
may occur or operation of other equipment may be affected.
When using a SCART or HDMI cable, it is recommended to use fully wired
●
one.
Check the terminal type and cable plugs are correct when connecting.
●

Selecting channel

1. Display the TV Selection
2. Select the mode with
DVB-S / DVB-C /
The selectable modes vary depending on the channels stored.
●
You can also select the mode pressing
●
control or INPUT/OK/HOLD for MENU button on the control panel of
the TV.
If the TV Selection
●
VIERA Link "HDAVI Control™"
screen with TV
/ and press
DVB-T / Analogue
menu is not displayed, press
- 18 -
Summary of VIERA Link
OK to set
TV repeatedly on the remote
TV to switch the mode.