Panasonic TX-L42DT60E User Manual page 200

Parts of the TV become hot
Even if the temperature of parts of the front, top and rear panels has
●
risen, these temperature rises do not cause any problems in terms of
performance or quality.
Overcurrent error message appears
The connected USB device may cause this error. Remove the device and
●
turn the TV off with Mains power On / Off switch, then turn it on again.
Check foreign objects are not inside the USB port.
●
An error message appears
Follow the message's instructions.
●
If the problem persists, contact your local Panasonic dealer or the
●
authorised service centre.
The touch pad controller does not work or cannot be registered
Are the batteries installed correctly?
●
The batteries may be running low. Replace them with new ones.
●
Register again.
●
Settings
Use the touch pad controller within approx. 3.2 m from the TV. (The range
●
may be shortened depending on the obstacles between the TV and the
controller, or the surrounding environment.)
Voice Control function does not work
Voice Control function may not work properly depending on the
●
pronunciation, noise and network environment.
For details
●
Functions
Setup VIERA Touch Pad Controller
Voice Control
- 200 -