3D Eyewear - Maintenance; Viewing 3D - Panasonic TX-L42DT60E User Manual

3D Eyewear - Maintenance

■
Storing and cleaning the 3D Eyewear
Store the 3D Eyewear in a cool, dry place.
●
Clean using a soft, dry cloth.
●
– Wiping the 3D Eyewear with a cloth that is covered in dust or dirt may
scratch the eyewear. Shake off any dust from the cloth before use.
– The lens of the 3D Eyewear is easily broken. Be careful when cleaning
the lens.
Do not use benzene, thinner or wax on the 3D Eyewear, otherwise this
●
may cause peeling of the paint.
Do not dunk the 3D Eyewear in liquid such as water.
●

Viewing 3D

You can enjoy viewing 3D images with contents or programmes
corresponding to the 3D effect by wearing the 3D Eyewear.
This TV supports Frame Sequential, Side by Side and Top and Bottom 3D
●
formats.
– Frame Sequential is the 3D format that the images for the left and right
eyes are recorded with the high definition quality and alternately played
back.
1. Put the 3D Eyewear on
2. View the 3D images
Safety precautions will be displayed when you first watch the 3D image.
●
Select Yes or
If you select Yes, this message will be displayed again in the same
condition after Mains power On / Off switch is next turned on. Select
if you do not want to display this message again.
■
Playing back 3D-compatible Blu-ray disc (Frame Sequential
format)
Connect the 3D-compatible player via a fully wired HDMI compliant cable.
●
(If you use the non 3D-compatible player, the images will be displayed in
2D mode.)
If the input mode is not switched automatically, select the input mode
●
connected to the player.
Watching
No to continue to view 3D images.
External equipment
- 51 -
Watching external input
No