Table of Contents
Advertisement
Maintenance & Supplies
Loading Paper (continued)
Programming Copy Size of Universal Tray
When changing the paper size of the universal tray as described in the previous page,
perform the procedure below to program the new size.
1 When the paper size of the universal tray is changed, the Basic Screen will
automatically change to the Universal Tray Size Selection Screen.
NOTES:
1 The Universal Tray Size Selection Screen cannot be displayed if any screen other than the Basic
Screen is displayed.
2 Pressing [AUTO RESET] will restore the Basic Screen without the copy size programmed.
2 Touch the size key.
If the correct size is selected, the Basic Screen will be restored automatically.
If the selected size is incorrect, the machine displays the message "Please select
correct tray size" and will not return to the Basic Screen.
To Display Universal Tray Size Selection Screen
When "Univ" is displayed as the copy size indication on the Basic Screen, you can
display the Universal Tray Size Selection Screen to select the copy size.
1 Touch
on the Basic Screen. The Universal Tray Size Selection Screen will be
Univ.
displayed.
2 Select the correct size according to the step 2 mentioned above.
12-4 Maintenance
Universal Tray Size Selection Screen
Advertisement
Table of Contents
Troubleshooting
