Table of Contents
Advertisement
Section 8 : Original Scanning Condition
Resolution (High Quality) (continued)
High Mode (continued)
3
Place Originals ... FACE UP in RADF
Position original(s) in the document feeder or on the platen glass.
Hint:
When using the Platen memory copy, press [STORE] to illuminate the Memory copy mode. Position
original on the platen glass, and start scanning. See p. 6-26 ~ p. 6-27.
When using the RADF memory copy, position originals in the document feeder, and start scanning.
See p. 6-28 ~ p. 6-29.
4
Start Copying
Press [ START PRINT ].
To delete the scanned data without printing, press [ STOP/
CLEAR ].
To reset the copying conditions to the initial setting, press
[ STOP/CLEAR ] then [ AUTO RESET ].
After copying is completed, press [ AUTO RESET ] to release
the mode and reset the machine.
8 - 4
FACE DOWN on Platen Glass
PRINT QUANTITY
INTERRUPT
PROOF COPY
RECALL CLEAR QTY.
START PRINT
ST
Advertisement
Table of Contents
Troubleshooting
