Simple Setup - Panasonic SC-PM86D Operating Instructions Manual

Simple setup

Making the connections Making the connections
Connect the AC mains lead only after all other connections have been made. Connect the AC mains lead only after all other connections have been made.
Conserving power
The main unit consumes a small amount of power, even when it is in standby mode (approx. 0.7 W). To save power when the unit is not to be
used for a long time, unplug it from the household mains socket. You will need to reset some memory items after plugging in the unit.
Antenna connections Antenna connections
■ AM loop antenna
Stand the antenna up on its base.
Please refer to "Connecting to other external
unit" on page 27 for more information on AUX
connection.
For the United Kingdom, Continental Europe,
Australia and N.Z.
Please refer to "Connecting the Universal Dock for iPod" on
page 27 and "Connecting and playing a Bluetooth device"
on page 28 for more information on the OPTION port
connection.
Speaker connections Speaker connections
(3-Ω)
Incorrect connection can damage the unit.
6
Connect the
left (L) side
in the same
way
■ FM indoor antenna
Tape the antenna where reception is best.
Please refer to "Digital Output" on page 28 for
more information on the DIGITAL OUT connection.
Power supply connection Power supply connection
FOR THE UNITED KINGDOM ONLY
READ THE CAUTION FOR AC MAINS LEAD ON PAGE 4
BEFORE CONNECTION.
Insertion of connector
Even when the connector is perfectly inserted, depending on
the type of inlet used, the front part of the connector may jut out
as shown in the drawing. However there is no problem using
the unit.
Appliance inlet
Note:
• The included AC mains lead is for use with this unit only.
Do not use it with other equipment.
• Do not use an AC mains lead from other equipment.
Adhesive
tape
To household mains
socket
Connector