Panasonic SC-PM86D Operating Instructions Manual page 28

Using other equipment (continued)
Connecting and playing a Bluetooth device Connecting and playing a Bluetooth device
For the United Kingdom and Continental Europe
By connecting a Bluetooth Receiver (example: SH-FX570R, sold
separately), you can receive and play the audio stored in your
Bluetooth audio source device (personal computer, etc).
SH-FX570R
(not included)
1
Connect the Bluetooth Receiver into the OPTION port and
press [ , OPTION] to select "OPTION".
2
Pairing and play your Bluetooth audio device. (See the
SH-FX570R's instruction manual.)
3
Press [ , ] or [
playback.
4
Adjust the volume of the main unit.
5
Press [ , OPTION] to start play.
Operating the television Operating the television
Point the remote control at the television for the following operations.
Press to switch the television on or off
Press to switch the television's video input mode
Press to adjust the volume
Note:
Some models cannot be operated by this remote control.
Enjoying audio from the television Enjoying audio from the television
Preparation
Confi rm the audio connection to the SCART (AV)
on the main unit (\ page 7).
Press [EXT-IN, FM/AM]
"AUX".
*2
: For audio input through the SCART (AV) terminal.
AV
AUX : For audio input through the AUX terminal.
Reduce the volume on the television to its minimum, and then adjust
the volume of the main unit.
Digital Output Digital Output
Change the settings when you have connected equipment through
this unit's DIGITAL OUT terminal.
28
Rear panel of
this main unit
, ] to select your desired item for
*2
or AUX terminal
*2
1 3
(or [EXT-IN] ) to select "AV
PCM OUTPUT
2
Select the maximum sampling frequency of "PCM OUTPUT".
Check the digital input limitations of the equipment you connect.
"UP TO 48kHz":
Signals over 48 kHz converted to 48 kHz or 44.1 kHz
"UP TO 96kHz":
Signals over 96 kHz converted to 48 kHz or 44.1 kHz
Note:
• Signals from copy-protected discs are converted to 48 kHz or
44.1 kHz irrespective of the setting.
• Some equipment cannot handle sampling frequencies of 88.2 kHz,
even if they can handle 96 kHz. Read your equipment's operating
instructions for details.
DOLBY DIGITAL, DTS and MPEG
"BITSTREAM" (Factory preset for "DOLBY DIGITAL" and "DTS"):
Select if the equipment you connected can decode the signal.
"PCM" (Factory preset for "MPEG"):
Select if the equipment you connected cannot decode the signal.
IMPORTANT
If the equipment you connected cannot decode the signal, the
setting must be changed to "PCM". If not, signals the equipment
cannot process will be output by this unit, causing high levels of
noise which can damage your hearing and the speakers.
Home Theatre—Enjoying more powerful sound Home Theatre—Enjoying more powerful sound
Enjoy the powerful movie theatre and hall-like sound available
with multiple channel audio found on DVD-Video by connecting an
amplifi er and speakers.
Rear panel of
this main unit
Recording Output
• With DVD, the following conditions must be met:
a) the disc does not have protection preventing digital recording,
and
b) the recording equipment can handle signals with a sampling
frequency of 48 kHz.
• You cannot record WMA/MP3.
When recording DVDs, make the following settings.
" or
– "PCM OUTPUT": "UP TO 48kHz" (
– "DOLBY DIGITAL"/"DTS"/"MPEG": "PCM" (
tab).
Using the VIERA Link "HDAVI Control Using the VIERA Link "HDAVI Control
What is VIERA Link "HDAVI Control
VIERA Link "HDAVI Control
linked operations of this unit, and a Panasonic television (VIERA)
under "HDAVI Control
equipment with the HDMI cable.
See the operating instructions for connected equipment for
operational details.
Amplifi er (not included)
VOLUME
(DVD) IN
Speaker (example)
Connect three or more
speakers for surround
sound.
Coaxial digital cable
(not included)
Do not bend sharply when
connecting.
page 21, "AUDIO" tab).
page 21, "AUDIO"
TM
"?
TM " is a convenient function that offers
TM ". You can use this function by connecting the
TM TM " "