Panasonic SC-PM86D Operating Instructions Manual page 32

Troubleshooting guide (continued)
■ Unit displays
When the unit is in standby
mode, the display lights up and
changes continuously.
The display is dark.
"NO PLAY"
"NO DISC"
"OVER CURRENT ERROR"
"F61"
"DVD U11"
"ERROR"
"DVD H "
"DVD F "
stands for a number.
"REMOTE 1" or "REMOTE 2" • Match the modes on the main unit and remote control. Depending on the number being
"U70 &"
& stands for a number.
The actual number following "U70"
will depend on the state of the
main unit.
■ Television displays
" "
"ERROR"
"Check the disc"
"THIS DISC MAY NOT BE
PLAYED IN YOUR REGION"
"AUTHORIZATION ERROR"
"RENTAL EXPIRED"
Main unit's screen saver
remains.
■ Using the USB device
The USB drive or its contents
cannot be read.
Slow operation of the USB
device.
■ Listening to the radio
Distorted sound or noise is
heard.
"ST" fl ickers or does not light.
A beat sound is heard.
32
• Turn off the demo function.
• If you set the clock, demo function will be turned off automatically.
• Select "BRIGHT" in "FL DIMMER" in the "OTHERS" tab.
• You inserted a disc which the unit cannot play; insert one that can.
• You inserted a blank disc.
• You inserted a disc that has not been fi nalized.
• You have not inserted a disc; insert one.
• You have not inserted the disc correctly; insert it correctly.
• The USB device is drawing too much power. Switch to DVD/CD mode, remove the USB and
turn the unit off.
• Check and correct the speaker cord connections.
If this does not fi x the problem, there is a power supply problem. Consult the dealer.
• Disc is dirty. Wipe it clean.
• Incorrect operation performed. Read the instructions and try again.
• Trouble may have occurred. The numbers following "H" and "F" depend on the status of the
unit. Turn the unit off and back to on. Alternatively, turn the unit off, disconnect the AC mains
lead, and then reconnect it.
• If the service numbers fail to clear, note the service number and contact a qualifi ed service
person.
displayed ("1" or "2"), press and hold [OK] and the corresponding numeric button ([1] or [2]) for
at least 2 seconds.
• The HDMI connection acts unusually.
– Please use HDMI cables that have HDMI logo (as shown on the cover page).
– The connected equipment is not HDMI-compatible.
– The HDMI cable is too long.
– The HDMI cable is damaged.
• The operation is prohibited by the unit or disc.
• You are trying to display an incompatible group or content.
• You are trying to play a protected group or content. You cannot play it.
• This disc may be dirty.
• Only DVD-Video discs that include or have the same region number as the one on the rear
panel of this unit can be played.
• You are trying to play the DivX VOD content that was purchased with a different registration
code. You cannot play the content on this unit.
• The DivX VOD content has zero remaining plays. You cannot play it.
• When using the HDMI connection, audio/video information is continually transferred
between the main unit and the television regardless of which source has been selected on
the main unit. This is normal.
• The USB drive format or its contents is/are not compatible with the system.
• The USB host function of this product may not work with some USB devices.
• USB devices with storage capacity of more than 32 GB may not work in some instances.
• Large fi le size or high memory USB fl ash drive takes longer time to read and display on the
television.
• Adjust the position of the FM or AM antenna.
• Use an outdoor antenna.
• Turn the television off or move it away from the unit.
Page
5
—
21
9
—
—
—
8
—
6
8
—
—
—
26
—
—
—
—
—
—
—
—
Cover
page
22
22
—
—
—
—
—
—
7
—