Panasonic SC-PM86D Operating Instructions Manual page 17

Functions menu (continued) Functions menu (continued)
DATE DISPLAY
REPEAT MODE
ROTATION
SUBTITLE
ANGLE
PICTURE MODE
ZOOM
TRANSFER MODE
: OFF ON
JPG
C 4 OF F
DATE
OF F
DAT E D I S P L A Y
(\ page 14, Repeat play)
JPG OF F
C − − − −
DATE
OF F
RE P E AT MODE
A-B Repeat (To repeat a specifi ed section)
Except (Still picture part)
Press [OK] at the starting and ending points.
Select "OFF" to cancel.
To rotate a picture (during pause)
: 0 90 180 270
JPG
C 4 OF F
DATE
OF F
ROT A T I ON
To select subtitle language
Example:
T 5 C 13 1: ENG / 2 0 c h
OFF
OF F
SUB T I T L E
(with multiple subtitles)
(SVCD only)
• On +R/+RW, a subtitle number may be shown for subtitles that are not displayed.
• "ON" or "OFF" appears only with discs that contain subtitle on/off information (Subtitle on/off
information cannot be recorded using Panasonic DVD Recorders).
(with multiple angles) To select a video angle
Example:
T 5 C 13 1: ENG / 2 0 c h
OF F OFF
ANG L E
Example:
N ORMA L NORMA L
P I C T URE MODE
NORMAL : Normal images.
CINEMA1 : Mellows images and enhances detail in dark scenes.
CINEMA2 : Sharpens images and enhances detail in dark scenes.
DYNAMIC : Enhances the contrast for powerful images.
ANIMATION : Suitable for animation.
To select various zoom sizes
Example:
NORMA L N ORMA L
ZOOM
NORMAL AUTO
Example:
NORMA L NORMA L
AU TO
TRANS F E R MO E D
If you have chosen "480p"/"576p"/"720p"/"1080p" (progressive) or "1080i" (interlace) (
FORMAT"), select the method of conversion for progressive output to suit the type of material.
– The setting will return to AUTO or AUTO1 when the disc tray is opened, the unit is turned off or another
source is selected.
When playing PAL discs
: Automatically detects the fi lm and video content, and appropriately converts it.
AUTO
: Select when using AUTO, and the content is distorted.
VIDEO
: Select this if the edges of the fi lm content appear jagged or rough when
FILM
AUTO is selected.However, if the video content is distorted as shown in the
illustration to the right, then select AUTO.
When playing NTSC discs
AUTO1 : Automatically detects the fi lm and video content, and appropriately converts it.
AUTO2 : In addition to AUTO1, automatically detects fi lm contents with different frame rates and
appropriately converts it.
: Select when using AUTO1 and AUTO2, and the content is distorted.
VIDEO
0
(SVCD)
0
x 1 . 0
1
x 1 . 0
1
x2 x4
page 18, "VIDEO
17