Panasonic HDC-SX5 Operating Instructions Manual page 89

Selecting the scenes to copy
¬ Connect the AC adaptor to this unit,
then insert a DVD-RAM or a DVD-RW
formatted on this unit (l 93) or a new
disc.
¬ Rotate the mode dial to select
and then select the [
1
Press the MENU button, then
select [DISC COPY]
[COPY SELECT]
press the cursor button.
2
Select the scene to be copied
and then press the cursor button.
A Scene size
B Remaining space on the disc
The selected scene is encircled by a red frame.
≥ When the cursor button is pressed again, the
selected scene will be cancelled.
≥ Up to 99 scenes can be set in succession.
≥ If you select a scene with a scene size that
exceeds the remaining space on the disc, the
remaining space on the disc display will turn
red and the amount exceeded will be
displayed.
Cancel the selected scene and select scenes
that do not exceed the space on 1 disc.
3
Move the cursor button up or
down to select [START] and
press the cursor button.
] tab.
#
[YES] and
#
MENU
4
When the confirmation message
appears, select [YES], then press
the cursor button.
To complete copying
Press the MENU button.
≥ Do not turn off the power on this unit while
copying.
≥ You can copy all the scenes at one time when
[COPY ALL] is selected in step 1.
≥ We recommend preparing a spare disc before
copying.
≥ The order in which the scenes were copied
cannot be changed.
≥ Data that has been recorded on another device
cannot be copied.
≥ When 2 or more discs are necessary for
copying, the last scene copied to a disc is
automatically divided to fit the space on the
disc.
≥ If you will delete all the data on the SD card
when copying is complete, be sure to play back
the discs to check that they have been copied
correctly before deleting.
Editing
89
VQT1G66