Panasonic HDC-SX5 Operating Instructions Manual page 84

Playback
right and then pressing the centre of the cursor
button.
≥ The file number display switches to the page
number when the still picture playback tab or
[ ]/[ ] is selected.
4
Press the cursor button.
The selected file is played back on the full
screen.
≥ The operation icon is automatically displayed
on the screen.
5
Move the cursor button to
operate.
1/;: Slide show (playback of the still pictures
on the SD card in numerical order) start/
pause.
Plays back the previous picture.
E:
Plays back the next picture.
D:
Stops the playback and shows the
∫:
thumbnails.
84
VQT1G66
ª About still picture compatibility
≥ This unit is compliant with the unified standard
DCF (Design rule for Camera File system)
established by JEITA (Japan Electronics and
Information Technology Industries
Association).
≥ The file format supported by this unit is JPEG.
(Not all JPEG formatted files will be played
back.)
≥ If a non-standard file is played back, the folder/
file name may not be displayed.
≥ This unit may degrade or not play back data
recorded or created on another product and
another product may degrade or not play back
data recorded on this unit.
≥ While this unit accesses the SD card (the
access lamp is lit), do not remove the SD card.
≥ Do not operate the mode dial during the slide
show.
≥ It takes time to display the file depending on
the number of pixels of the file.
≥ Files which cannot be displayed as thumbnails
(the thumbnails are displayed as [
cannot be played back.
≥ If you attempt to play back a file which is a
different format or a damaged file, an error
message appears and the screen shows the
thumbnails.
≥ The date/time displayed may be different from
the recording date/time and it may take time to
display the thumbnail display when playing
back still pictures not recorded on this unit.
≥ The power will not turn off when the LCD
monitor and the viewfinder are closed and
retracted.
])