Lens Hood - Panasonic HDC-SX5 Operating Instructions Manual

41
42
41 Disc compartment (l 35)
42 Grip belt (l 15)
43 Outlet
Using grip belt
Adjust the belt length so it fits your hand.
Adjust the belt length and the pad
position.
1 Flip the belt.
2 Adjust the length.
3 Replace the belt.

Lens hood

Rotate the lens hood
43
counter-clockwise A to remove it. In
order to attach it, place into slot B,
and then rotate it clockwise C.
≥ Attach the MC protector or the ND filter of the
Filter Kit (VW-LF37WE; optional) in front of the
lens hood. Do not attach the other accessories
on the hood. (Except for the lens cap)
(Refer to the operating instructions for the
Filter Kit.)
≥ When fitting the tele conversion lens
(VW-T3714H; optional) or the wide conversion
lens (VW-W3707H; optional), first remove the
lens hood.
(Refer to the operating instructions for the tele
conversion lens or the wide conversion lens.)
(Be careful about the following.)
When 2 lens accessories, such as the ND filter
and tele conversion lens, are fitted and the zoom
lever is pressed toward the W side, the 4 corners
of an image will be darkened. (Vignetting)
(When fitting 2 lens accessories, first remove the
lens hood and then fit them.)
Before using
15
VQT1G66