Beep Sound; Power Save - Panasonic HDC-SX5 Operating Instructions Manual

Others
Menus related to [SETUP]
ª [DISPLAY]
≥ [OFF] ≥ [ON]
The screen indications are selected as shown in
the illustration below.
[OFF]
[ON]
+ 1
ª [POWER SAVE]
≥ [OFF] ≥ [5 MINUTES]
[OFF]:
The power saving function is not activated.
[5 MINUTES]:
When about 5 minutes have passed without any
operation, this unit automatically turns off to
prevent the battery from running down. When
you use this unit turn it on again.
≥ In the following cases, the unit may not turn off
even when you set this to [5 MINUTES].
jWhen using the AC adaptor
jWhen connecting the unit to a computer or
printer via the USB cable
jWhen PRE-REC is used
132
VQT1G66
ª [BEEP SOUND]
≥ [OFF] ≥ [ON]
This allows operations such as starting and
ending recording to be signaled by a beep.
When [OFF] is set, no beep is heard when an
operation such as recording is started or ended.
1 Beep
When you start recording
When you turn on the power
When this unit is recognised by the computer or
the printer, etc.
2 Beeps
When you pause recording
When you turn off the power
2 Beeps for 4 times
When an error occurs e.g. recording not starting.
Check the sentence displayed on the screen.
(l 135)
ª [INITIAL SET] (HD mode only)
≥ [YES] ≥ [NO]
When there is a menu that cannot be selected
due another function or mode being activated,
set to [YES] for changing the menu settings back
to the initial shipping condition.
(The language setting cannot be changed back
to the initial shipping condition.)
ª [DEMO MODE] (HD mode only)
≥ [OFF] ≥ [ON]
This item is used to start the unit demonstration.
(Only when the mode dial is at the
position) If you set this to [ON] without inserting a
disc or an SD card, this unit is automatically set
to the demonstration mode for introducing its
functions. If any button is pressed or operated,
the demonstration mode is cancelled. If no
operations take place for approx. 10 minutes, the
demonstration mode automatically starts. To
terminate the demonstration mode, insert a disc
or an SD card, or set this to [OFF]. For normal
use, set this function to [OFF].
or