Playback Using Viera Link (Hdavi Control ™ ) - Panasonic HDC-SX5 Operating Instructions Manual

With other products
Playback using VIERA Link (HDAVI Control
If you connect this unit to a Panasonic TV (VIERA) compatible with VIERA Link (HDAVI Control
a HDMI cable, the following linked operations become possible.
≥ You can use the remote control for the TV to control playback on this unit.
≥ If you use the remote control for the TV to turn off the power, the power on this unit also turns off.
(The power cannot be cut off when recording a motion picture, formatting a disc, finalizing a disc,
un-finalizing a disc, deleting data, recovering data or connecting the unit to a computer with a USB
cable.)
≥ If you connect with a HDMI cable and then turn on the power, the input channel on the TV
automatically switches to this unit's screen. If the TV's power is in standby status, it will turn on
automatically (if [Set] has been selected for the TV's [Power on link] setting).
jDepending on the HDMI terminal on the TV, the input channel may not switch automatically. In
this case, use the remote control for the TV to switch the input channel. (For details on how to
switch input, please read the operating instructions for the TV.)
≥ If VIERA Link does not work properly, refer to page 145.
1
Connect this unit and a Panasonic TV (VIERA) compatible with
VIERA Link with a HDMI cable (optional).
≥ Use a HDMI cable (optional) A with the logo shown on above.
≥ If the TV has two or more HDMI input terminals, it is recommended to connect this unit to HDMI2 or
HDMI3.
2
Set so that VIERA Link is activated on the connected TV.
≥ Read the operating instructions of the TV for how to set etc.
3
Set the mode dial to
4
Press the MENU button, then select [SETUP]
press the cursor button.
≥ The default setting is [ON].
106
VQT1G66
to turn on the power.
™
)
HDMI IN
[VIERA Link]
#
PHOTO
VIDEO
™
) with
[ON] and
#