Switching Temporarily To A Program Of Your Choice Automatically - JVC UX-S77 Instructions Manual

3
Start searching.
SEARCH
(at the same time)
ST
ST
Ex. When "NEWS" is selected
The receiver searches 30 preset FM stations, stops when
it finds the one you have selected, and tunes in to that
station.
• If no program is found, "NOTFOUND" appears on the
display.
• To stop searching any time during search, press PTY
SEARCH.
To continue searching after it stops on an unwanted
station
While the indications on the display are flashing...
ON SCREEN
PTY
SEARCH
(at the same time)
Switching Temporarily to a Program of
Your Choice Automatically
The Enhanced Other Networks function allows the System
to switch temporarily to a preset FM station broadcasting a
program of your choice (TA, NEWS, or INFO).
• This function works while listening to an FM station
providing the required signals.
ON SCREEN
PTY
Remote
ONLY
While listening to an FM station, select the program type.
MENU
TA/News/
Info
(at the same time)
TA Traffic announcement in your area
NEWS News
INFO Program the purpose of which is to impart
advice in the widest sense
How the Enhanced Other Networks function actually
works:
CASE 1
If a station is broadcasting the program of your choice
The System continues tuning in to the current station.
When a station broadcasting the program of your choice,
the System automatically switches to the station. The
indicator of received PTY code starts flashing.
When the program is over, the System goes back to the
previously tuned station, but the function still remains
active (the indicator stops flashing and remains lit).
CASE 2
If a station is broadcasting the program of your choice
The System automatically switches to the station. The
indicator of received PTY code starts flashing.
When the program is over, the System goes back to the
previously tuned station, but the function still remains
active (the indicator stops flashing and remains lit).
CASE 3
If the station currently tuned in is broadcasting the
programme of your choice
The indicator of received PTY code starts flashing.
When the program is over, the indicator stops flashing (the
function still remains active).
TA NEWS INFO
OFF
(Annullato)
«
«
«
«
19