Troubleshooting - Maytag MEDX5SPAW0 Installation Instructions Manual

27" wide models
Hide thumbs Also See for MEDX5SPAW0:
Table of Contents

Advertisement

Available languages

Available languages

8,
Rotate outer door
Take outer door and rotate it 180° and set it back down on
inner door. Be certain to keep cardboard spacer centered
between doors. Reattach outer door panel to inner door
panel so handle is on the side where hinges were just
removed. Insert 4 door screws.
9,
Attach
door hinges
0
Reattach door hinges to dryer door so that the larger hole is
at the bottom of the hinge.
1 0,
Remove
door strike
i r
Remove
door strike from dryer cabinet
and set aside.
2O
f1 1,
Remove
and transfer
plugs
Remove the 4 screws that attach 2 plugs on the left side.
Transfer plugs to opposite side using the same 4 screws.
1 2, Insert screws
in hinge holes on
dryer cabinet
NOTE: 2 people may be needed to reinstall door.
Insert screws into the bottom holes on left side of dryer cabinet.
Tighten screws halfway. Position door so large end of door hinge
slot is over screws. Slide door up so screws are in bottom of
slots. Tighten screws. Insert and tighten top screws in hinges.
Remove door strike plug. Insert the door strike removed in
Step 10 into hole and secure with screw. Insert door strike
plug into original door strike hole and secure with screw.
'14,
Check
door strike
alignment
Close door and check that door strike aligns with door catch.
If it is needed, slide door catch left or right within slot to
adjust alignment.
See the Use and Care Guide or visit our website and
reference "Frequently Asked Questions" to possibly avoid
the cost of a service call.

Advertisement

Table of Contents
loading

Table of Contents