Maytag MDG4057BWW Installation Instructions Manual page 4

mt mum
i_._ Base Exhaust
_!=_minimum
-T
,l,
IMPORTANT TO INSTALLER
PLEASE READ TIlE FOLLOWING INSTRUCTIONS CARSEFUT._LY BEFORE
STARTING TO INSTALL TI_ DRYER. THESE INSTRUCTIONS SHOL_LD BE
RETAINED FOR FUTURE REFERENCE.
REMOVE THE DOOR FROM ALL DISCARDED APPLIANCES SUCH AS DRYERS
TO AVOID THE DANGER OF A CHILD SUFFOCATING.
LOCATION CONSIDERATIONS
The dryer should be located to permit adequate room in front for loading the dryer, and suf-
ficient room behind the dryer for the exhaust system.
This dryer is factory-ready for rear exhaust. To exhaust out the bottom or left side use the
accessory exhaust kit (see Accessories). Instructions are included win the kit.
It is important to make sure the room has adequate make-up air. The area where the dryer is
located must not obstruct the flow of combustion or ventilating air.
On gas dryers, adequate clearance as noted on the data plate must be maintained to insure
adequate air for combustion and proper operation of the dryer.
THE DRYER MUST NOT BE INSTALLED OR STORED IN AN AREA WHERE IT
WILL BE EXPOSED TO WEATHER AND/OR WEATHER. THE DRYER AREAS IS TO
BE KEPT CLEAR AND FREE FROM COMBUSTIBLE MATERIALS, GASOLINE AND
OTHER FLAMMABLE VAPORS AND LIQUIDS. A DRYER PRODUCES COMBUS-
TIBLE LINT, THE AREA AROUND THE DRYER SHOULD BE KEPT FREE OF LINT.