Installation - LG LRE30955S Installation Manual

[_ INSTALLATION DRAWINGS
NOTE
SAVE FOR THE USE OF THE LOCAL ELECTRICAL INSPECTOR.
CLEARANCES AND DIMENSIONS (Figure 1)
To install range refer to the following Figure 1.
For installation in CANADA, a Free-standing range is not to be installed closer than lS/32 (12ram) from any
adjacent surface.
• Make sure that the wall covering,
countertop and cabinets around the
range can withstand the heat (up to
194°F) generated by the range.
- Discoloration, delamination or melting may occur.
- This range has been designed to comply with the
maximum allowable wood cabinet temperatures
of 194°R
/_ __ _'-3"(7.6cm)
_[ / I 63.5Cm)counter
Acceptable f _ _th
electrical I __
° ° I o/utletarea._ I / _-
_------._6" d5.2_ _ I 13 _"
Counter
__..4_,_ _/__///_ _:_>_J(91,4cm)top h eight
(76 2cm) "_
A = 30"(76.2 cm) For U.S.A
= 30"(76.2 cm) ~ 31"(78.7 cm) For CANADA
FIGURE 1
• Cabinet storage space located above
the surface units should be avoided.
• Install a range hood that projects
horizontally a minimum of 5 inches
beyond the bottom of the cabinets If
cabinet storage is to be provided.
- The risk of burns or fire by reaching over the
heated surface elements can be reduced.
1
36"
(91.4cm)
!
o
"30" (76.2cm I * 30_(_m6_Cm)
t
*'15"
(38.1cm)
o o
FIGURE 2
MINIMUM DIMENSIONS (Figure 2)
* 30"(76.2 cm) minimum clearance between the top of the cooking surface and the bottom of an
unprotected wood or metal cabinet; or 24"(60.9 cm) minimum when bottom of wood or metal cabinet is
protected by not less than 1/4"(6.4 cm) flame retardant millboard covered with not less than no. 28 MSG
sheet steel, 0.015"(0.381 ram) stainless steel, 0.024"(0.610 ram) aluminum or 0.020"(0.508 ram) copper.
** 15"(38.1 cm) minimum between countertop and adjacent cabinet bottom.
4