Description Of Controls - Hoover HP6 110M Instructions For Use Manual

40000693.qxd 13/11/2003
All the controls on your product's control panel are listed as follows. The button
functions are selected when the buttons are pressed in. Carefully read the
relevant descriptions detailed below:
On/Off
After selecting the programme press the on/off button to start the machine. At the
end of the cycle press again to reset the button and switch off the appliance.
Power on
Door Locked Indicator Light
A special safety device prevents the door from being opened immediately
after the end of the cycle. A 'Door locked' indicator light is illuminated when
the door is fully closed. Wait for 2 minutes after the wash cycle has finished
and the door locked neon has gone off before opening the door. As a safety
measure check that there is no water evident in the drum.
Extra Rinse
This option adds more water at the rinsing stage. This can help to avoid skin
irritation from detergent residues for people with particularly sensitive skin.
Selecting the Extra Rinse button is also recommended when washing heavily
soiled fabrics, requiring the use of a lot of detergent, or when the wash load
contains items made of towelling whose fabrics have a greater tendency to retain
detergent.
Creaseguard
This option is available on delicates and woollens. When this option is selected
the machine will stop and the load will be held within the water in the drum. This
reduces the creasing. To continue with the wash cycle the Creaseguard button
must be pressed and the programme will re-start.
Economy button
This option can be utilised on all programmes. By selecting the Economy option
the wash temperature is limited to the water inlet temperature thus reducing
energy consumption.
16:45 Page 12

Description of Controls

Power off
12