Oregon Scientific RM813P Instruction Manual page 5

HOW TO SET AND
ACTIVATE THE ALARM
This unit is equipped with 2 alarms: Single Alarm [
Weekday Alarm [ ] . For the Single Alarm, it will go off only once
at the preset time. For the Weekday Alarm, it will be enabled from
Monday to Friday and disabled automatically during weekend
(i.e., Saturday and Sunday).
To set and activate the alarm:
1. Select the alarm you want to set by pressing [
2. Press and hold [ ] for 2 seconds when the selected Alarm is
displayed. The hours will blink.
3. Enter the values by [
4. Confirm the entry by pressing [
5. The minutes will blink.
6. Repeat (3) and (4) to finish the setting. The alarm will be
activated automatically.
Follow the same procedures to set and activate the Single and/or
Weekday Alarm.
HOW TO DEACTIVATE THE ALARM
To deactivate the alarm:
1. Select the alarm you want to deactivate by pressing [
2. Press [
" -:-- " will be displayed when the alarm is being deactivated.
3. To activate the alarm again, press [
alarm is in display.
] and
CRESCENDO ALARM AND
When the alarm goes off at the preset time, the projector will be
turned on for 8 seconds. The respective ALARM ON icon [
[ ] will be flashing and the alarm sound will be turned on.
The crescendo alarm function allows the alarm sound to start off
] .
gently with step-up intensity. Without interruption, the alarm will
go off for 2 minutes.
5
] / [ ] buttons.
] .
] / [ ] buttons to deactivate the selected Alarm.
] / [
SNOOZE FUNCTION
] .
] buttons when such
] or