Oregon Scientific M962 Instruction Manual page 3

(RM962U - UK version within a 1500km radius of radio signal
(MSF-60) from Rugby, England)
When the batteries are first installed, the unit will automatically
search for a radio signal.
When in search mode, the antenna icon [
process takes between two (2) and ten (10) minutes. After initial
search, short periodic reception-signal scans will commence several
times a day.
The antenna icon indicates the quality of reception.
STRONG
WEAK
When the reception is complete, the radio-reception signal will
stop blinking.
Interference
Reception can be affected by a number of factors. For best reception,
place the device away from metal objects and electrical appliances.
Note: Interference from sources such as TV sets can affect
the signal. If, after batteries have been inserted for ten
minutes, the signal is not received, then set the time manually
(see section: How To Set The Calendar Clock Manually).
To deactivate the auto-reception of RF signal, press and hold both
[
disappear to show this deactivation.
To activate the auto-reception again, press and hold both buttons
for 2 seconds again and the antenna icon will re-appear.
] will blink. This
"SECONDS" AND DAY-OF-THE-WEEK
The "seconds" and the day-of-the-week share the same section of
the display.
NO RECEPTION
RECEIVING
The day-of-the-week is displayed as an abbreviation in five
languages.
To change the "seconds" display to the day-of-the-week display:
• When the "seconds" are displayed, press MODE once.
To change the day-of-the-week display to the "seconds" display:
• When the day-of-the-week is displayed, press MODE once.
3
] and [ ] buttons for 2 seconds. The antenna icon will
DISPLAY
day-of-the-week display "second" display