Setting The Alarm; Alarm And Snooze Function; Setting The World Time - Oregon Scientific RM932 User Manual

SETTING THE ALARM

This clock is equipped with 2 alarms: Weekday Alarm and Single
Alarm. For the Weekday Alarm, alarm will only
preset times during weekday (i.e., from Monday to Friday) and will
be automatically disabled during the weekend (i.e., Saturday and
Sunday). For the Single Alarm, alarm will
preset time.
To set the alarm:
1. Press [ALARM] to change to the respective alarm-time display
mode.
2. Press and hold [ALARM] for 2 seconds.
3. Use [UP]/[DOWN] button to enter the hours. Press [ALARM]
button to confirm.
4. Use [UP]/[DOWN] to enter the minutes. Press [ALARM] to
exit.
The alarm will be automatically activated after setting. The corre-
sponding Alarm-On indicator [
tivate the alarm, press the [ALARM ON/OFF] button when the
corresponding alarm time is displayed. [ -: -- ] will be displayed to
indicate such deactivation.
sound out at the
sound out once at the
] or [ ]will appear. To deac-

ALARM AND SNOOZE FUNCTION

An alarm will go off for 2 minutes in two-step crescendo patterns if
undisturbed. The Alarm-On indicator will flash and the back-light
will be activated for 5 seconds. To mute the alarm, press any key.
Pressing [SNOOZE/LIGHT] button will activate the snooze func-
tion.
When the snooze function is activated, the alarm will be muted tem-
porarily and set off again after 8 minutes. To disable the snooze
function when the alarm goes off, you can press and hold the
[SNOOZE/LIGHT] button for 3 seconds. Alternatively press
[ALARM] or [ALARM ON/OFF] button.

SETTING THE WORLD TIME

This clock features a World-time display function so that you can
check the corresponding time of different places in the world in-
stantly with DST [Daylight Saving Time] automatically
The names of the world cities are shown in an abbreviated 3-letter
format (e.g., "FRA" for Frankfurt, Germany).
To set the world time:
1. Press [WORLD TIME] button once. The World-Time icon will
be flashing.
2. Use the [UP]/[DOWN] button to select the world city.
3. Press the [WORLD TIME] button to confirm.
6
adjusted.