LCD DISPLAY
1
2
3
4
1. Low battery indicator
2. Clock time
3. Radio reception signal indicator
4. Month-day / Day-month calendar
5. Time-zone offset
6. Dual alarms
SAFTY AND CARE INSTRUCTIONS
SAFTY PRECAUTIONS
Please observe the following safety precautions when
setting up and using this product.
•
LCD panel – The LCD panel is made of glass and
may break if the unit is dropped or impacted.
•
Heat sources – Keep the product away from heat
sources such as radiators, stoves, heaters, and other
heat-generating products.
•
Water and moisture – Do not use the product in or
near water or in high moisture areas such as a
bathroom.
RM926(EN4)
3
CARING FOR THIS PRODUCT
To ensure you receive the maximum benefits from using
this product, please observe the following guidelines.
5
•
Cleaning –Use a damp cloth. Do not clean with liquid
cleaning agents, benzene, thinner, or aerosols.
•
Repair – Do not attempt to repair the product or
modify the circuitry by yourself. Contact the retailer or
6
a qualified repairman if the product requires servicing.
Only use replacement parts that are recommended
by the manufacturer.
•
Do not scratch hard objects against the LCD display
as this may cause damage.
GETTING STARTED
UNPACKING THE PRODUCT
When you unpack your radio-controlled clock, make
sure to keep all the packing materials in a safe place, in
case you need to later transport or return it for servicing.
BATTERIES
2 pieces of UM-4 or "AAA" batteries are supplied with the
product. To load the batteries:
1. Insert the batteries according to the + and – polarities
shown.
2. Press RESET.
3
2/3/05, 11:21 AM