Table of Contents
Advertisement
TROUBLESHOOTING
Use this troubleshooting guide to help you remedy any difficulties you may be experiencing while using the product.
Should any problem persist after you have checked these symptoms, consult your nearest Oregon Scientific dealer.
PROBLEM
SYMPTOM
CHECK THIS
Clock time not No radio signal
Electromagnetic interference or
correctly set.
reception.
objects are barring reception.
Orientation or placement of unit is not
optimum or out of range for receiving
radio signal.
No alarm.
Alarm does
Alarm is disabled.
not sound.
LCD is dim or
Battery may be
does not
running low on
illuminate.
power.
Operation not
Certain functions Device requires reset.
normal.
do not perform
correctly.
RM926(EN4)
10
REMEDY
Place the unit far away from PCs,
phones, and other electronic
equipment and near a windowsill.
Wait for at least 24 hours.
Turn on the alarm setting.
appears on the LCD.
Install new batteries.
Reset the unit with a blunt stylus
pressed against the RESET hole.
10
2/3/05, 11:21 AM
Advertisement
Table of Contents
