Warnings; Troubleshooting - Oregon Scientific MSR939 User Manual

All manuals and user guides at all-guides.com
The default settings are:
Clock Time: 12.00 PM
Date: 1
Time Offset: +0
Alarm 1 and 2 Time: 6.00 AM
Alarm Melody: #1 with low volume
Daily Alarms: Disabled
Motion Alarm Start Time: 12.00 AM
Motion Alarm Stop Time: 6.00 AM
Motion Alarm: Disabled
12hr, DD / MM, °C
UK Display Setting:
24hr, DD / MM, °C
EU Display Setting:

WARNINGS

This product is designed to give you years of service if
handled properly. Oregon Scientific will not be
responsible for any deviations in the usage of the device
from those specified in the user instructions or any
unapproved alterations or repairs of the product.
Observe the following guidelines:
• Never immerse the product in water. This can
cause electrical shock and damage the product.
• Do not subject the product to extreme force,
shock, or fluctuations in temperature or humidity.
RMR939P English R8 OP
Black
st January 2004
NOTE
contents of this user manual are subject to change
without notice. Images not drawn to scale.

TROUBLESHOOTING

PROBLEM
Clock time
is not
correctly
set.
No alarm.
20
20
• Do not tamper with the internal components.
• Do not mix new and old batteries or batteries of
different types.
• Do not use rechargeable batteries with this
product.
• Remove the batteries if storing this product for a
long period of time.
• Do not scratch the LCD display.
The technical specification of this product and
SYMPTOM REMEDY
No radio Place the clock far
signal away from PCs,
reception. phones, and other
electronic equipment
and near a
windowsill. Wait for
at least 24 hours.
Alarm does Turn on the alarm
not sound. setting.
8/23/04, 11:55 AM