KitchenAid KBFO42FSX00 Installation Instructions Manual page 7

42" (106.7 cm) bottom-mount built-in refrigerator; architect series/overlay series
Hide thumbs Also See for KBFO42FSX00:
Table of Contents

Advertisement

Available languages

Available languages

Side View
The depth from the front of the top grille to the back of the
refrigerator cabinet is 25%" (64.4 cm).
The power cord is 84" (213 cm) long.
The water line attached to the back of the refrigerator is 5 ft
(1.5 m) long. Height dimensions are shown with leveling legs
extended 1/8"(3 mm) below the rollers.
253/8-
(64.4 cm)
231/2"
(60 cm)
.833/8 ,,
(211.6 cm)
84" (213 cm)
Power Cord
31/2" (9 cm)
*When leveling legs are fully extended to 11/4"(3.2 cm) below
rollers, add 11/8"(2.9 cm) to the height dimensions.
Top View
41 I/4"
(105 cm)
25%"
(64.5 cm)
!
Front View
Width dimensions were measured from trim edge to trim
edge.
Height dimensions are shown with leveling legs extended 1/8"
(3 mm) below the rollers.
_-_
421/4'' (107.3 crn)_
.833/8"
(211.6 cm)
L
*When leveling legs are fully extended to 11/4"(3.2 cm) below
rollers, add 11/8"(2.9 cm) to the height dimensions.
The location must permit the door to open to a minimum of 90 °.
Allow 41/2 '' (11.4 cm) minimum space between the side of the
refrigerator and a corner wall.
NOTE: More clearance may be required if you are using overlay
panels or custom handles.
To adjust the door swing, see "Adjust Door Swing."
42" (106.7 cm} Models
÷
407/16 ''
(102.7 cm)
131/2 ''
(34.3
cm)
H
437/16"
(110,3 cm)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kbfc42fss00Architect kbfc42fssOverlay kbfo42fsx

Table of Contents