KitchenAid KSSP36QMS02 Installation Manual page 15

For Classic Series models: KSSS36FMX, KSSS42FMX,
KSSS48FMX, KSSS36QMB, KSSS42QMB, KSSS48QMB,
KSSS36QMW, KSSS42QMW, KSSS48QMW, KSSS36QMX,
KSSS42QMX, and KSSS48QMX.
If you plan to install custom wood panels, you will need to create
the panels yourself or consult a qualified cabinetmaker or
carpenter. See dimension drawings for panel specifications.
IMPORTANT" Panels weighing more than recommended may
cause damage to your refrigerator.
NOTE: Dimensions shown have a (+j 1A6"(1.5 mm) tolerance.
Panels that are more than 1/4"(6.35 mm) thick must be routed. If
panels are less than 1/4"(6.35 mm) thick, install a filler panel
between the doors and decorative panels.
Top Grille Panel
The top panel should not weigh more than 10 Ibs (4.5 kg).
[
_(184 mm)
Model A
36
42
48
35%" (89.5 cm)
41%" (105 cm)
47%" (120 cm)
Door Panels for Non-dispenser Models
The freezer panel should not weigh more than 30 Ibs (13.5 kg).
The refrigerator panel should not weigh more than 50 Ibs (23 kg).
"_: A_ _:_ B -_'-
Door Panels for Dispenser Models
The two freezer panels combined should not weigh more than
30 Ibs (13.5 kg). The refrigerator panel should not weigh more
than 50 Ibs (23 kg).
237/16''
59.5 cm)
347/1e''
87.4 cm)
._ B-_ I
Model A B
36 141/4 '' (36.2 cm) 191/4 '' (48.9 cm)
42 163/4 '' (42.6 cm) 223/4 '' (57.8 cm)
48 19W' (48.9 cm) 26V4" (66.7 cm)
707/16"
(179 cm)
Top Grille Panel - Routing Requirements
If the custom panels are thicker than 1/4"(6.35 mm), the top and
bottom edges of the top panel should be edge routed V2"(1.3 cm)
and %" (9.5 mm), respectively. Both ends should be edge routed
%" (2.2 cm) as shown.
v,,, I
(6,35 ram)
re.x, LI
(2.2 cm)
Top Top
Grille Grille
t
\
]5_- W,
[7/8_,, i_ (6.35 mm)
(2.2 cm)
Model A B
36 14W' (36.2 cm) 191/4 '' (48.9 cm)
42 163/4 '' (42.6 cm) 22%" (57.8 cm)
48 19W' (48.9 cm) 261/4 '' (66.7 cm)
15