Placing An Index Mark - Olympus LS-100 User Manual

Playback

Placing an index mark

An index mark will help you quickly locate
a desired playback position when you fast-
forward, rewind, or cue a file.
3
A
• Be sure to assign the [INDEX] function to the Fn
button in advance ( ☞ P. 1 07).
1
At the position you wish to
place an index mark, press the
preassigned Fn button.
• A number appears on the display, and
the index mark is placed.
• Placing an index mark does not stop
recording or playback, so you can
continue placing index marks at other
positions by the same procedure.
▌
Erasing an index mark
1
Play the file with the index mark
you wish to erase.
EN
48
2
During playback, select the
index mark to be erased with the
9/0 button.
3
Press the ERASE button while the
index number is being displayed
(approx. 2 seconds).
• The index mark will be erased.
• The index numbers after the erased
index mark will be automatically
adjusted.
Notes
• Each file can contain up to 99 index marks. If
you try to place more than 99 index marks, [No
more can be set] will appear.
• Index marks cannot be added to or erased from
a locked file ( ☞ P. 91).
• Index marks can only be placed in files recorded
by this recorder.