File menu [File Menu]
2
Press the OK button.
3
Press the +/-/ 9/0 button to
select the project for the bounce
process.
6
4
Press the OK button.
• The screen shifts to the Multi-Track
screen.
5
{
[Menu]
[Bounce]
EN
100
{
[File Menu]
6
Press the OK button.
• The bounce check window appears.
7
Press the + button to select [Start].
8
Press the OK button.
• The animation is displayed on the
screen, and the bounce process starts.
When [Done] is displayed, bouncing is
finished.
• When the bounce process completes,
the new PCM format [44.1kHz/16bit]
file is saved in the project.
A
• When [Bounce] ( ☞ P. 107) is set to the Fn
button, pressing the allocated button starts the
bounce process.
Note
• [Bounce] does not function in the recorder
mode.