Olympus LS-100 User Manual page 128

Troubleshooting
Symptom
No sound from the
connected musical
instrument
CD writing is not
available
Cannot be converted
to an MP3 file
Cannot perform
bouncing
8
Cannot use the tuner/
lissajous
EN
128
Probable cause
[Input Select] is incorrectly
set.
The recording level is low.
The [Rec Monitor] is set to
[Off ].
The selected file is not enabled for
CD writing.
The selected file is not enabled to
be converted to an MP3 file.
The volume of the track is either
completely reduced or muted.
The SD card does not have enough
free space.
[Input Select] is incorrectly
set.
Action
Make sure the [Input Select] is correctly set ( ☞ P. 83).
Use the REC LEVEL dial to adjust the recording level
( ☞ P. 37).
Set the [Rec Monitor] to [On] ( ☞ P. 88).
Select a PCM format [44.1kHz/16bit] file that is
enabled for CD writing.
Select a PCM format [44.1kHz/16bit] or
[44.1kHz(mono)]file that is enabled to be converted
to an MP3 file.
Check the volume of the track and the [On/Off] of the
mute ( ☞ P. 61).
Erase unnecessary files ( ☞ P. 50).
Check the connected musical instrument to set the
[Input Select] correctly ( ☞ P. 83).