Olympus LS-100 User Manual page 38

Multi-track linear pcm recorder
Hide thumbs Also See for LS-100:
Table of Contents

Advertisement

Recording
Pausing the recording
Press the REC button during recording.
3
• [ ≠ ] will appear on the display.
• The recording standby mode will be
released after two hours, and the recorder
will enter the stop mode.
• To resume recording, press the REC button
again.
Listening to the sound being
recorded (Recording monitor)
Connect headphones to the EAR jack of
the recorder, and you can listen to what is
being recorded. The monitoring volume
can be adjusted with the VOLUME dial.
• Please set the [Rec Monitor] to [On]
beforehand ( ☞ P. 88).
EN
38
Notes
• To protect your ears, turn the volume down to [0]
before putting on the headphones.
• To avoid feedback, do not bring the headphones
near the microphone during recording.
• Changing the monitoring volume does not
affect the recording level or the mic gain.
Dividing a file while recording
A
• Be sure to assign the [DIVIDE] function to the Fn
button in advance ( ☞ P. 1 07).
• Please set in advance the [Rec Format] to [PCM],
and the recording rate to [48 kHz] or [44.1 kHz]
( ☞ P.85).
• Set [Rec Mode] to [Normal] ( ☞ P.80).
At the position where you want to
divide the file, press the Fn(DIVIDE)
button.
• Recording will continue uninterrupted.
• The maximum number of files that can be
stored in the [RECORDER] folder is 999. If there
are already more than 998 files, file division will
not be possible. If you have already reached
the limit, calculate the number of times you
will divide the file and delete the files that you
do not need ( ☞ P.50) or move them to other
folders ( ☞ P.92) beforehand to make space.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents