Voice Commands Related To Navigation - Pioneer AVIC-HD3 Operation Manual

Voice commands related to navigation

Give the following verbal commands after switching to the navigation screen.
Search by entry on the address book
Destination* ➞ Address Book* ➞ <Registered location's pronunciation> ➞ Location Screen (A)
Search the facilities in vicinity
Destination* ➞ Vicinity Search ➞ <Category Name>, <Sub Category Name> ➞ Location Screen (B)
Displaying the destination history
Destination* ➞ Destination History ➞ Display the Destination History screen.
Setting the route to your home
Destination* ➞ Return Home ➞ If the route already set, touch VOICE icon to start route calculation. (If there is no
route, the system starts the route calculation.)
Making phone call to your home
Destination* ➞ Call Home ➞ Touch VOICE icon to call your home. (Only when the phone number is registered in your
home.)
Setting your home to waypoint
Destination* ➞ Waypoint Home ➞ Touch VOICE icon to start route calculation. (This function is only available if you
have set the destination.)
Display the map of surroundings on your home
Destination* ➞ Display Home ➞ Display the map of surroundings on your home.
Display the map of surroundings on your destination
Destination* ➞ Display Destination ➞ Display the map of surroundings on your destination.
Set the map location as your destination
Scroll the navigation map or switch the scroll mode from search result screen. ➞ Basic Operation* ➞ Set As Destina-
tion ➞ If the route already set, touch VOICE icon to start route calculation. If there is no route, the system starts the
route calculation.
Set the map location as your waypoint
Scroll the navigation map or switch the scroll mode from search result screen. ➞ Basic Operation* ➞ Set As Way-
point ➞ Touch VOICE icon to start route calculation. (This function is only available if you have set the destination.)
Registering the map location to the address book
Scroll the navigation map or switch the scroll mode from search result screen. ➞ Basic Operation* ➞ Registration ➞
The system register that point and Information edit screen appears.
Operating the navigation map scale
Map Operation* ➞ Change Scale* ➞ XXXX <kilo> metre(s) Scale <25metres, 50metres, 100metres, 200metres,
500metres, 1kilometre, 2kilometres, 5kilometres, 10kilometres, 20kilometres, 50kilometres, 100kilometres,
200kilometres, 500kilometres> ➞ Map screen will be changed to selected scale.
Notes:
• These commands are available only when [km / mile] setting is [km].
• This function is not available in vehicle dynamics mode.
Map Operation* ➞ Change Scale* ➞ XXXX mile(s) Scale <0.02miles, 0.05miles, 0.1miles, 0.25miles, 0.5miles,
0.75miles, 1mile, 2.5miles, 5miles, 10miles, 25miles, 50miles, 100miles, 250miles> ➞ Map screen will be changed to
selected scale.
Notes:
• These commands are available only when [km / mile] setting is [mile].
• This function is not available in vehicle dynamics mode.
Map Operation* ➞ Change Scale* ➞ XXXX mile(s)/yards Scale <25yards, 50yards, 100yards, 0.25miles, 0.5miles,
0.75miles, 1mile, 2.5miles, 5miles, 10miles, 25miles, 50miles, 100miles, 250miles> ➞ Map screen will be changed to
selected scale.
Notes:
• These commands are available only when [km / mile] setting is [Mile&Yard].
• This function is not available in vehicle dynamics mode.
Map Operation* ➞ Zoom Out, Zoom In ➞ Map screen will zoom out or zoom in.
130