Character Entry - Kyocera FS-1018MFP Basic Operation Manual

Character Entry

Input screen and key functions
BASIC OPERATION GUIDE
To enter e-mail addresses, file names, etc. the characters are entered
using the keypad.To move the cursor, use the
2
1
Address Entry:
h_pttr@
ABC
Cancel Text
5 6
1
Cursor - Characters are entered in the location of the cursor. To
delete a character, move the cursor to the location of the
corresponding character and press [Stop/Clear].
2
Character Limit Icon - Indicates when character entry has reached
the maximum number allowed.
3
Keypad - Use to enter characters. Refer to page 3-20 for a list of
characters that can be entered using each key.
4
Reset/Power Key - Use to cancel the machine's temporary
conditions and character entry procedure.
5
Select Key (left) - Press to select options available on the bottom left
of the display.
6
Select Key (right) - Press to switch between character entry modes.
7
Key - Press to move the display cursor to the left.
8
Back key - Press to go back to the previous screen of the current
menu.
9
Key - Press to move the display cursor upwards.
10
Key - Press to move the display cursor downwards.
11
Enter Key - Press this key to register the currently entered
characters.
12
Key - Press to move the display cursor to the right.
13
Stop/Clear Key - Press to delete the character in the cursor position.
If the cursor is in an open position, the character to the left of the
cursor is deleted.
7 9 11 12
8
10
Preparation
and keys.
3 4
13
3-19