Setting The Date And Time - Kyocera FS-1018MFP Basic Operation Manual

Setting the Date and Time

BASIC OPERATION GUIDE
It is recommended that you follow the instructions below to set the date and
time correctly prior to using the machine for sending scan data by e-mail.
NOTE:
COMMAND CENTER can also be used to program this setting,
refer to the Advanced Operation Guide for information.
1
Press the [System Menu / Counter] key. The Sys. Menu/Count screen
displays.
2
Press or to select Date/
Timer Set and press [Enter].
The Date/Timer Set screen
displays.
3 Press or to select Year/Time
and press [Enter].
The Date Setting screen displays.
4
Press or to register the
current Year and press
5 Press or to register the
current Month and press
Sys. Menu/Count.:
System Setting
*
Adjust
Date/Timer Set.
Date/Timer Set.:
Back
*
Year/Time
Date Format
Date Setting:
.
Year
2004
( Time Zone
Cancel
Date Setting:
.
Year
2004
( Time Zone Greenwich
Cancel
Preparation
Exit
Exit
Month Day
04 15
:Greenwich )
Month Day
04 15
: )
3-15